Having a Cybertec Universal Remote can make your life much easier by giving you control over multiple devices with just one handy gadget.

To take full advantage of your new remote, you’ll need to know some essential Cybertec Universal Remote Codes.

I’ve got those codes so you can start using your remote with your devices seamlessly.

Cybertec Universal Remote Codes

3 Digit Codes List

Here are some popular 3-digit Cybertec Universal Remote Codes for various devices:

  • TV: 092, 018, 063, 099, 023
  • DVD: 008, 011, 018, 021, 024
  • Soundbar: 025, 033, 037, 039, 040

Keep in mind that some devices may require a different code.

It may vary depending mostly on the device’s brand and model.

4 Digit Codes List

For devices that need 4-digit codes, check out the list below:

  • TV: 049, 050, 051, 091, 113, 123
  • DVD: 375, 378

That’s it! With these Cybertec Universal Remote Codes at your disposal, you’re all set to set up and use your remote with a variety of devices.

Programming Your Cybertec Universal Remote

Here’s a quick guide on getting that remote programmed.

Direct Code Entry Method

To program your Cybertec universal remote, first, you’ll want to use the direct code entry method.

It’s the easiest way to get things up and running, and it saves time by connecting your remote to your TV perfectly.

Just follow these simple steps:

  1. Turn on your device. Make sure the device you want to control is powered on.
  2. Look up your device’s keycode. Check the Cybertec universal remote code list to find the correct keycode for your specific device brand and model.
  3. Press the device button on your remote. This should be the same type of device you’re trying to control (TV, DVD, etc.).
  4. Enter the keycode. Using the number pad, type in the found keycode.

If everything goes smoothly, your Cybertec remote should now be programmed to control your device!

Code Search

If you can’t find the direct code for your device or the direct code entry method isn’t working, try the code search.

This method will automatically cycle through codes until it finds the right one for your device.

Here’s how to do it:

  1. Turn on your device. Make sure the device you want to control is powered on.
  2. Press the device button on your remote. This should be the same type of device you’re trying to control (TV, DVD, etc.).
  3. Press and hold the power button on your remote. Keep holding it down until your device turns off.
  4. Release the power button. As soon as your device turns off, you can let go of the power button on your remote.
  5. Test your remote. Try using the remote to control your device. If everything is working properly, congrats! If not, repeat the process until you find the right code.

Compatibility with Popular Brands


Your Cybertec universal remote works with many Sony devices, including TVs, DVD players, and soundbars.

You’ll be able to kick back and enjoy your favorite shows using just one remote.


LG devices are also compatible with Cybertec universal remotes.

Whether you’ve got an LG TV, soundbar, or Blu-ray player, you’ll be able to easily program your remote to work with it.


You can pair your Cybertec universal remote with various Philips devices, including TVs and sound systems.


For all you Samsung lovers, don’t worry – your Cybertec universal remote has got you covered.

It’ll work with your Samsung TV, home theater system, DVD, and Blu-ray players.


Your Cybertec universal remote can be programmed to work with Vizio TVs, soundbars, and other devices.


Sharp devices are compatible with your Cybertec universal remote too.

You’ll be able to program your remote to work with a variety of Sharp TVs and home theater systems.

Device Specific Remote Control Codes


Alright, so you want to control your soundbar with your Cybertec universal remote, right?

Check out these common remote control codes for soundbars:

  • Samsung: 20045, 21075, 21014
  • Yamaha: 30176, 31331, 32061

Just follow the programming instructions to enter these codes and you’ll be jamming in no time.

Blu-ray Players

Here are some popular Blu-ray player codes for your Cybertec remote:

  • Sony: 21516, 20864, 21033
  • Panasonic: 20490, 20162, 21035

Remember to enter them using the same programming steps for your remote.


Here are some codes for various audio receivers:

  • Denon: 31360, 32857, 32862
  • Onkyo: 30842, 30135, 31266

Just follow the programming process, punch in these codes, and you’re in control, my friend.


Here are some common cable remote control codes:

  • Comcast: 11095, 11823, 11866
  • DirecTV: 10463, 10030, 10797

Same drill, y’all—enter these codes using the programming method, and you’re all set!

Additional Features and Functions

Learning Mode

One cool feature of the Cybertec universal remote is the Learning Mode.

This function allows your remote to learn commands from other existing remotes.

So, if your remote is missing specific buttons you use frequently, no worries!

Learning Mode’s got your back. To activate the Learning Mode, follow these steps:

  1. Put your current remote control and the Cybertec universal remote head-to-head, about 1-3 inches apart.
  2. Press the Learning Mode button on the Cybertec remote (usually marked as “Learn” or “L”).
  3. Press the button on the existing remote that you want to teach the Cybertec remote – the LED on the Cybertec remote will blink.
  4. Press the desired button on the Cybertec remote where you want to save the learned command. The LED on the Cybertec remote will light up.
  5. Repeat steps 3 and 4 for every button you wish to teach the universal remote.

Make sure to check the manual for any specific steps or instructions for your particular Cybertec remote model since different remotes might have slightly different Learning Modes.

Device Code Reference Table

When it comes to pairing your Cybertec universal remote with your devices, make sure you reference the Device Code needed to program your remote successfully.

Here’s a quick look at some popular device codes for Cybertec remotes:

Device BrandCode

To program your remote using the Device Code, follow these simple steps:

  1. Turn on the device you want to pair with the Cybertec remote.
  2. Press the corresponding Device Button (e.g., TV, DVD, AUX) on your universal remote.
  3. Enter the Device Code using the number pad on the remote. If entered correctly, the LED should blink twice to confirm success. If the LED doesn’t blink, try re-entering the code.
  4. Test your remote! Press the CH+ or CH- buttons, and the device should respond accordingly.

In case your device brand isn’t listed, refer to your Cybertec remote’s manual for a complete list of supported devices and their codes.

Troubleshooting Tips

Sometimes, your Cybertec Universal Remote might not work as expected, but don’t fret. Here are some quick and easy troubleshooting tips to help ya out.

Batteries: First things first, check those batteries.

Weak or dead batteries can cause poor performance or even totally stop your remote from working.

Pop out the old ones and replace ’em with fresh ones – just make sure they’re in the right orientation, or you’ll be scratching your head even more.

LED Light: Pay attention to the LED light on your remote.

If it’s not lighting up or showing the appropriate signal when you press a button, there could be a problem.

Make sure you’re pointing the remote directly at the device, and there’s no obstruction between ’em.

Power Button: Press the power button on your remote and see if it responds.

If it’s not working, try reprogramming your remote using the appropriate codes.

Sometimes, a code might not be compatible or the programming just needs a refresh.

Speaking of codes, ensure that you’ve used the correct one for your specific device.

You might need to try a few different codes from the list if the first one doesn’t do the trick.

Don’t give up – we all know success can be a bit of a trial and error process.

Connections: Make sure your device and remote are in check. Double-check if your TV, DVD player, or any other gadget you’re trying to control is plugged in and powered on.

If it’s all good on their end, but your remote still ain’t working, then you know it’s time to focus on the remote itself.

Frequently Asked Questions

How to pair Cybertec remote?

To pair your Cybertec remote, first, make sure your device is turned on.

Point the remote towards the device and press the corresponding button on the remote (e.g., for a TV, press the “TV” button).

Enter the appropriate code (found in the manual or online) and the remote should now be paired with the device.

Which code to use?

The code you need to use depends on the brand and model of your device.

You can look up the code in the remote’s manual, or you can find it online by searching for “Cybertec universal remote codes” followed by the brand and model of your device.

Manual programming method?

Manual programming involves entering the correct code into the remote for your device.

Turn on the device you want to control and point the remote toward it.

Press the appropriate button on the remote for the device (e.g., “TV”) and enter the code.

The remote should now be programmed to control your device.

Using remote without code?

If you don’t have the code for your specific device, you can use the Auto Search method.

First, turn on the device you want to control.

Press and hold the appropriate button for that device on your Cybertec remote (e.g., “TV”) until the LED light turns on.

Point the remote towards the device, then press and hold the fast-forward button until the device turns off.

Release the button, and your remote should be programmed to control the device.

Code for specific TV brands?

The Cybertec universal remote works with most TV brands, and the codes for specific brands can be found in the manual or online.

Some common brand codes include:

  • Samsung: 018, 021
  • LG: 024, 025
  • Sony: 033, 037
  • Toshiba: 039, 040

How to find remote manual?

To find the manual for your Cybertec universal remote, you can check in the box of the remote, contact the customer support, or search online by entering the model number of the remote followed by “manual” in your favorite search engine.

Leave a Reply

Your email address will not be published. Required fields are marked *